Servo - Hitec HS-646 water proof (Standard Size)

  • Product Code: ACT0030
  • Reward Points: 112
  • Not Available in stock
  • $62.55

  • Ex Tax: $56.35
  • Price in reward points: 11270

Servo

Servo - Hitec HS-646 water proof (Standard Size)

This unique motor is the Hitec HS-646WP servo. What separates this servo from the rest is that it is waterproof with a IP67 (Ingress Protection-67) rating! The HS-646WP is able to take in an impressive 7.4 volts and deliver 161.1 oz-in. of maximum torque at 0.17 sec/60°, and those are numbers you can rely on!

This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start. The HS-646WP servo comes standard with a 3-pin gold plated power and control cable and all hardware listed below.

Note: The HS-646WP is actually slightly thicker than its other standard size cousins. Therefore, it is NOT compatible with the Actobotics Servo Mounts or ServoBlock Kits.

Features:
Voltage: 6.0-7.4 Volts
Torque: 133.3/161.1 oz-in. (6.0/7.4V)
Speed: 0.20/0.17 sec/60° (6.0/7.4V)
Direction: Clockwise/ Pulse Traveling 1500-1900usec
Rotation: 180°
Dual Ball Bearing
3 Metal Gears & 1 Nylon Gear
3-Pole Ferrite Motor
C1 Standard Spline
IP67 Waterproof Rating

Includes:
1x HS-646WP Servo
1x Four Point Horn
1x Double Arm Mega Horn
1x Circle Mega Horn
2x Single Arm Horn
4x Rubber Grommets
4x 2x15mm Phillips Screw
4x Brass Eyelets

Dimensions:
41.9 x 21 x 40mm
Wire Length: 180mm
Weight: 60g

Documents:

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Servo - Fitec Generic High Torque (Standard Size)

Servo - Fitec Generic High Torque (Standard Size)

Here is a powerful, low-cost, reliable servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 83.47 oz-in. of maximum torque at 0.16 sec/60°This is..

$26.03

Servo 9g - Generic (Sub-Micro Size)

Servo 9g - Generic (Sub-Micro Size)

 Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to..

$15.15

Servo - Hitec HS-35HD (Ultra Nano Size)

Servo - Hitec HS-35HD (Ultra Nano Size)

This is is the smallest servo we carry but don't let its size fool you, the HS-35HD is a durable and strong little servo thanks to its Metal-Karbonite gear train! The HS-35HD is on..

$40.63

Servo MG996 360degrees

Servo MG996 360degrees

•  Dimension : 40mm x 19mm x 43mm •  Weight : 55g •  Operating Speed : 0.17sec / 60 degrees (4.8V no load) •  Operating Speed : 0.13sec / 60 degrees (6.0V no load) •  S..

$14.10

MG996 Servo 180Degrees

MG996 Servo 180Degrees

Dimension : 40mm x 19mm x 43mm Weight : 55g Operating Speed : 0.17sec / 60 degrees (4.8V no load) Operating Speed : 0.13sec / 60 degrees (6.0V no load) Stall Torque : 1..

$12.49

Tags: servo, hitec, hs-646, water, proof, (standard, size)